D+ Drill Designer
GuidesSign inStart free
  1. Home
  2. Guides
  3. Step sizes

Marching band step size: 8 to 5, 6 to 5 and more

Updated October 29, 2026

Step size tells a performer how long each step is. It’s written as the number of steps it takes to cover 5 yards, the distance between two yard lines. “8 to 5” means 8 steps every 5 yards, which is a 22.5-inch step.

Common step sizes

Steps per 5 yards and the length of each step
Step sizeSteps per 5 yardsStep lengthUsed for
16 to 51611.25 inchesVery small steps; slow, careful moves and tight spaces
12 to 51215 inchesSmall steps; short moves over many counts
8 to 5822.5 inchesThe standard step; yard lines are 8 steps apart
6 to 5630 inchesLarge steps; about the biggest most bands play through well
5 to 5536 inchesOne yard per step; very hard to march and play

A bigger number before “to 5” means smaller steps. 8 to 5 is the step most bands teach first, and drill coordinates are usually written in 8-to-5 steps, so a performer “4 steps inside the 40” is 2.5 yards from that yard line.

How to work out the step size of a move

Measure the move in a straight line from the old dot to the new one, then:

Step size (to 5) = counts × 5 ÷ yards moved
or, with the distance in 8-to-5 steps: counts × 8 ÷ steps moved

  • 10 yards in 16 counts: 16 × 5 ÷ 10 = 8, so the move is 8 to 5.
  • 10 yards in 8 counts: 8 × 5 ÷ 10 = 4, a 4 to 5 step that will be hard to march.
  • 4 steps in 8 counts: 8 × 8 ÷ 4 = 16, a small 16 to 5 step.

Diagonal moves

When a performer moves both sideways and forward or back, the straight-line distance is longer than either one. Use the Pythagorean theorem: a move 6 steps to the side and 8 steps back covers √(6² + 8²) = 10 steps. In 16 counts that is 16 × 8 ÷ 10 = 12.8 to 5.

Step size calculator

Enter how far the performer moves in a straight line and how many counts it takes.

8 to 5, 22.5 inches per step. A comfortable size for most bands.

How big is too big?

It depends on the band and the tempo. Many drill writers keep most moves between 8 to 5 and 6 to 5, and treat anything larger as something to fix or to save for a moment where the band isn’t playing hard. At fast tempos even 6 to 5 gets difficult, because each step has less time. Very small steps have their own problem: at 16 to 5 and smaller, staying in step and keeping the form straight takes concentration.

If a move is too big, add counts (take the move over 16 instead of 8), shorten it by moving the next form closer, or give that section a different path.

Checking step sizes as you write

Drill Designer shows the step size for each performer’s move into the current set and flags steps larger than 6 to 5, so you can fix big moves before they reach the field. See how to write drill for where step sizes fit in the whole process.

Write your next show in Drill Designer

Forms, paths and counts on a real field, set to your music, with dot books and drill charts for rehearsal. It runs in your browser and is free during early access.

Start free

More guides

  • How to Write Marching Band Drill: A Step-by-Step Guide
  • How to Read Marching Band Drill Coordinates
  • What Is a Dot Book? Marching Band Dot Sheets Explained
GuidesPrivacyTermsWhat’s newContact support

© 2026 Andrew Swan