D+ Drill Designer
GuidesSign inStart free
  1. Home
  2. Guides
  3. How to write drill

How to write marching band drill

Updated October 29, 2026

Drill is the map of where every performer stands, and how they get from one spot to the next, for the whole show. Good drill starts with the music, not the field. This guide walks through the order most writers work in, from the first listen to the first rehearsal.

1. Learn the music and build a count sheet

Listen to each movement until you can hear its phrases without thinking. Then count it: mark every phrase, every big hit and every change of mood, and number the measures. Write the counts down as a count sheet: one row per set, with the measure it starts on and how many counts it lasts.

A set is one picture on the field, reached on a given count. Most sets last 8 or 16 counts, following the phrases. Put sets where the music changes, not at fixed intervals, and leave room for holds where the band should stand still and play.

2. Plan the big moments first

Every movement has a few moments the audience should remember: the first big chord, the climax, the last note. Sketch the picture for each of those first. Once you know where the show has to land, the sets in between become transitions from one known picture to the next, which is much easier to write than drill from set 1 forward.

3. Choose forms that fit the sound

  • Loud, full moments: blocks, company fronts and large arcs facing the press box put the most sound forward.
  • Lyrical music: curves, circles and slow-turning shapes read well and are comfortable to play in.
  • Busy or light passages: smaller shapes, staggered lines or a controlled scatter add texture without asking for big sound.

Keep players who need to hear each other close together, keep the battery near the center of the field where the band can hear it, and give the color guard room for flags and equipment.

4. Write transitions the band can march

For each move, check two things: the step size and the paths. Step size is how far each performer travels per count. Most moves should sit between 8 to 5 and 6 to 5; bigger steps are hard to play through, especially at fast tempos. Our step size guide has the formula and a calculator.

Paths matter just as much. Watch for performers crossing through each other, two people heading for the same spot, and moves that run off the edge of the field. Straight-line moves are easiest to learn; curved paths, follow-the-leader and expanding or turning shapes add interest once the basics are clean.

5. Watch it from the stands

Play each transition from the audience’s view, ideally with the music. Forms that look clean from above can look muddled from the press box, and spacing problems are easier to see when everything is moving. Fix what looks wrong now: changes are cheap on paper and expensive at rehearsal.

6. Give performers their dots

Each performer needs their own position for every set, written as coordinates from the yard lines and hashes, along with the counts for each move. That usually means a dot book for every member and drill charts for the staff showing the whole picture.

7. Rehearse, then revise

Teach a few sets at a time and watch from above as often as you can. Some moves will be harder on the field than they looked on screen; adjust them and send updated dots. Small fixes early in the season save a lot of re-teaching later.

Doing it in Drill Designer

Drill Designer follows the same workflow. Add your music and line count 1 up with the downbeat, add sets as you go, and write forms with line, arc, circle, block, curve and freehand tools. Ghosts of the sets before and after and a path for every performer show each transition, and checks flag tight spacing, large steps and the edge of the field. When the show is ready, export dot books, drill charts and a video of the show with its music.

Write your next show in Drill Designer

Forms, paths and counts on a real field, set to your music, with dot books and drill charts for rehearsal. It runs in your browser and is free during early access.

Start free

More guides

  • Marching Band Step Size: 8 to 5, 6 to 5 and a Calculator
  • How to Read Marching Band Drill Coordinates
  • What Is a Dot Book? Marching Band Dot Sheets Explained
GuidesPrivacyTermsWhat’s newContact support

© 2026 Andrew Swan